Following a major portable power station recall in 2025, Reddit's r/solar and r/prepping communities saw a surge in questions about battery safety certification. The top concern: "How do I know if my supplier's CE certificate is real?"
This guide explains each major certification, how to verify it independently, and the minimum documentation you should demand before placing an OEM order.
UN38.3 — The One Certification Every Lithium Battery Must Have
UN38.3 is a series of transport safety tests defined by the United Nations for lithium cells and batteries. It is mandatory for shipping lithium batteries by air, sea or road in virtually every country. Without a valid UN38.3 report, your freight forwarder cannot legally accept the shipment.
What the tests cover:
- T1 – Altitude simulation: low pressure equivalent to 15,000 m altitude for 6 hours
- T2 – Thermal test: 72 °C for 6 hours, then −40 °C for 6 hours, 10 cycles
- T3 – Vibration: sinusoidal vibration per UN frequency profile
- T4 – Shock: 150g half-sine pulse
- T5 – External short circuit: terminals shorted at 55 °C ambient
- T6 – Impact / crush: 9.1 kg bar dropped from 61 cm onto cell
- T7 – Overcharge: charged at 2× maximum specified charge current
- T8 – Forced discharge: discharged through external resistance
Pass criteria: no fire, no explosion, no leakage, temperature rise <170 °C. A valid UN38.3 report names the exact cell or battery model, lists each test result with measured values, and is signed by an accredited laboratory.
CE Marking — What It Does and Doesn't Guarantee
CE is a self-declaration by the manufacturer that the product meets EU directives. For LiFePO4 power stations, the relevant directives are:
- Low Voltage Directive (LVD) 2014/35/EU — electrical safety for devices operating at 50–1,000 V AC
- EMC Directive 2014/30/EU — electromagnetic compatibility
- Battery Regulation (EU) 2023/1542 — replaces the 2006 Battery Directive; adds lifecycle, carbon footprint and supply chain due diligence requirements from 2026
- RoHS Directive 2011/65/EU — restricts hazardous substances
Critical point: CE marking does NOT require third-party testing for many product categories. A manufacturer can self-certify by conducting internal tests. The mark alone does not prove the product is safe — it proves the manufacturer claims it complies.
For high-risk products (portable energy storage above 2 kWh is increasingly treated as such in the EU), a Notified Body (NB) must be involved. Ask for the Notified Body number on the Declaration of Conformity (DoC).
TÜV Rheinland Factory Audit — What It Means
A TÜV Rheinland on-site audit verifies that a manufacturer's production processes, QC systems and test equipment match what they claim in their product documentation. It is NOT the same as product certification — it certifies the factory's capability, not a specific product.
LICITTI underwent a TÜV Rheinland on-site factory audit in July 2026. The audit covered:
- Cell incoming inspection protocols and equipment calibration records
- BMS programming and QC test procedures
- Final assembly and 100% pre-shipment discharge test records
- Environmental and safety management
The audit certificate is valid for 2 years. You can request a copy from any TÜV Rheinland-audited supplier.
Certification Requirements by Market
| Market | Required marks | Legal basis | Enforced by |
|---|---|---|---|
| EU27 | CE (LVD + EMC + Battery Reg), RoHS, UN38.3 | EU directives; Battery Regulation 2023/1542 | Market surveillance authorities per member state |
| United Kingdom | UKCA (post-Brexit CE equivalent), UN38.3 | UK Electrical Equipment (Safety) Regulations 2016 | OPSS (Office for Product Safety and Standards) |
| Australia / NZ | RCM (incl. SAA), UN38.3 | AS/NZS 4268, ACMA | ACMA; state electrical safety regulators |
| USA | FCC Part 15 (EMC), UN38.3; UL listing optional but preferred by retail | FCC regulations; DOT for transport | FCC; CPSC for consumer products |
| Saudi Arabia / UAE | SASO (KSA), ESMA (UAE), UN38.3 | GCC technical regulations | SASO; Emirates Authority for Standardization |
Minimum Documentation Checklist Before Ordering
- UN38.3 test report — from ILAC-accredited lab, covering the exact cell model and assembly
- CE Declaration of Conformity — must list all applicable directives and the Notified Body number (if applicable)
- CE test reports — LVD and EMC at minimum; request the actual IEC 62368-1 or IEC 62619 test report
- RoHS declaration — manufacturer or third-party lab
- Factory audit certificate — TÜV, SGS, Bureau Veritas or equivalent, issued within 3 years
- Battery cell specification sheet — with cell manufacturer name, model, capacity and cycle life data
Request LICITTI's Full Certification Package
We supply CE, UKCA, RoHS, UN38.3 and our TÜV Rheinland factory audit certificate with every serious inquiry. No NDA required for document review.
Request Compliance Documents →Related: OEM Sourcing Checklist · Market-by-Market Compliance Guide